WAIST TYPE SEAT BELTS ARE USED TO ENSURE COMFORTABLE WORKING AT HEIGHTS. THE BELT IS MADE OF 45 MM POLYESTER AND EQUIPPED WITH A COMFORT PAD. THE SYSTEM

HAS A BREAKING STRENGTH OF 22 KN. IT IS PRODUCED IN ACCORDANCE WITH EN 358/1999 STANDARD.

WAIST BELTS HAVE ABSOLUTELY NO PURPOSE OF PROTECTION FROM FALLING. THE PURPOSE OF USE IS ONLY TO PROVIDE COMFORTABLE WORKING.

THE WORKING POSITION SHOULD BE POSITIONED AND/OR ADJUSTED SO THAT THE ANCHOR POINT OF THE ROPE IS MAINTAINED AT OR ABOVE WAIST LEVEL, THE ROPE REMAINS

TAUT AND FREE MOVEMENT IS LIMITED TO A MAXIMUM OF 0.6 M.

WHEN THE WAIST BELT IS EQUIPPED WITH SHOULDER OR LEG STRAPS, THESE SHOULD NOT WEAKEN THE USE OF THE WAIST BELT IN ANY WAY. NO CONNECTING ELEMENTS

SHOULD BE ATTACHED TO THE SHOULDER OR LEG STRAPS. THE WAIST BELT SHOULD BE WORN IN A WAY THAT DOES NOT RESTRICT ARM AND LEG MOVEMENTS AND PROVIDES

PHYSICAL SUPPORT.

IT MUST BE CONSIDERED THAT THERE IS A RESCUE PLAN TO BE IMPLEMENTED IN ANY EMERGENCY THAT MAY OCCUR DURING THE OPERATION.

YOU CAN DOWNLOAD THE DETAILED USER GUIDE HERE.